YOU WILL NEED:-
2 pieces of fabric 6" x 9" - one for the outer and one for the lining



INSTRUCTIONS:
Take the 3 pocket pieces and fold them in half lengthways. Press.
Sew a line 1/4" from the folded edge....
Lay the first pocket on the lining piece with the raw edges 2" from the bottom of the lining piece and pin in place, sew the pocket on 1/4" from the raw edges .....
then lay the top pocket 3 1/4" from the bottom of the lining piece, pin it in place, then sew it onto the lining piece in the same way ....
Press both of the pockets up towards the top of the lining piece......
Position the bottom pocket so that the raw edges are aligned with the bottom edge of the lining piece. Pin in place.
Lay the piece for the outer on top of the piece with the pockets, right sides facing each other, and pin them together.....
Sew along both sides and the top with a 1/4" seam allowance, then trim the corners (take care not to nick the seam) ......
Turn the piece right sides out and press ........
Slip the first piece of Fast2Fuse inbetween the lining and the outer and push it up to the corner and as close as you can to the top and side. Press on both sides BUT ONLY HALF WAY DOWN, FROM THE TOP TO THE MIDDLE ........ Repeat with the other side again pressing ONLY HALF WAY DOWN FROM THE TOP TO THE MIDDLE......
Tuck the inside bottom edges around the Fast2Fuse and pin in place.










All parts of this pattern and instructions are copyright to Joy Coey, JoyPatch 2009. This pattern is for your personal use only and should not be used for profit without prior permission from Joy Coey.